In cases where a long-term care facility may not be able to set up negative pressure isolation, but they are still looking to improve the air quality and safety of that isolation space and surrounding areas, the Setra AIIR Watch can used to purify and recirculate the air. Regardless of the application, the air that passes through the Setra AIIR Watch is being sterilized to 99.99% effectiveness with the UV-C light and HEPA filtration inside. The key to this effective sterilization is the particles that are trapped by the HEPA filter inside the unit have UV-C bulbs entrained on them to neutralize viruses and bacteria on first pass through the Setra AIIR Watch. Instead of getting exhausted out to create negative pressure, the sterilized air can be recirculated to increase air changes per hour and purify the air in the space
Setra Blog
Environmental monitoring, especially particle counting, in cleanrooms is used to show that said cleanroom operates within its set parameters before and during manufacturing processes. The safety and quality of products can be affected if too many particles enter the manufacturing space or process. However, this monitoring is commonly still a manual process in many cleanrooms instead of routine or continuous particle counting. Cleanrooms are highly regulated environments that require the utmost attention to air quality and cleanliness.
Throughout the COVID-19 pandemic, the residents of long-term care facilities, senior living communities, and nursing homes have been one of the most impacted populations. With many at risk people living in single buildings or communities, as soon as one person becomes infected with COVID-19 the likelihood of the disease spreading among the community increases. Because COVID-19 is an airborne infection, understanding how to properly isolate an infected person from others can help increase the safety and reduce the risk of spreading the disease.
Why continuously monitor a cleanroom?
Cleanroom monitoring is performed for two reasons:
Join us on January 27 for Setra's Virtual Showcase. The event is free to attend!
Due to the coronavirus pandemic, most in-person tradeshows for 2021 have been cancelled or rescheduled. Instead, this year Setra will be hosting a free, online Virtual Showcase.
Amidst the COVID-19 pandemic, hospitals are expanding their isolation room capacity. Currently, Brownfield Regional Medical Center is using the AIIR Watch to create extra isolation rooms for any infectious disease patients in their facility.
Tank level can be measured in a variety of ways, and each method has its advantages and drawbacks. One of the most common methods for tank level measurements is the hydrostatic method. Hydrostatic pressure is a cost-effective way to measure tank level that doesn’t rely on the measurement being taken directly at the tank, unlike many other methods.
The hydrostatic method uses simple physics to measure tank level. The hydrostatic pressure of a liquid is equal to the height of the liquid above the location of the pressure measurement. The table below demonstrates how certain pressure ranges equal the accuracy of the height measurement.
Today's healthcare environments necessitate monitoring a wide array of parameters for maximum patient and healthcare staff safety. Nurses and facilities professionals oversee many parameters from patient status to patient room conditions. In this era of constant monitoring, upgrading a hospital's technology to the next generation of a nurse's monitoring station can save time, provide much more relevant information at a glance, and reduce stress. Setra's Continuous Environmental Monitoring System (CEMS) combines in-room sensing hardware with software to centrally monitor all critical room conditions.
As COVID-19 is an ever-increasing problem, making facilities ready to handle potential spikes of the virus is paramount. The safest way to handle the virus is to create isolation rooms where it can be quarantined if it appears. Setra's AIIR Watch can be brought into various spaces to quickly create isolation rooms.
Subscribe to Our Blog!
Topics
- Critical Environments (182)
- HVAC/R (179)
- General Industrial (153)
- Building Automation (134)
- General Industrial OEM (92)
- Energy Management (85)
- Test and Measurement (66)
- HVAC/R OEM (58)
- Barometric (44)
- Alternative Fuels (42)
- Medical (40)
- Process/Mfg Tank Level (40)
- Water and Wastewater (39)
- OHV (38)
- Oil and Gas (35)
- Industrial Vacuum (29)
- Calibration (25)
- Semiconductor (25)
- Particle Counting (20)
- Cleanroom Monitoring (17)
- Room Pressure Monitoring (16)
- Trade Show (12)
- cleanroom environment (12)
- Scales (11)
- Environmental Monitoring (10)
- Power Monitoring (10)
- Healthcare (9)
- Power Meters (9)
- Software (9)
- cleanroom monitoring systems (9)
- Case Study (8)
- critical environment technologies (8)
- data centers (8)
- Humidity (7)
- particle counter (6)
- pressure transducers (6)
- LITE room pressure monitor (5)
- hardware and software cleanroom monitoring systems (5)
- setra lite (5)
- Compliance (3)
- Video (3)
- hospital spaces (3)
- FAQ & Troubleshooting (2)
- Monitoring Compounding Pharmacies (2)
- Semiconductor Manufacturing (2)
- agencies that monitor pharmacies (2)
- energy (2)
- hvac (2)
- laboratories (2)
- monitor compound pharmacy (2)
- protected environment (2)
- regulatory compliance (2)
- setra lite features (2)
- usp 797 (2)
- Current Sensors and Transducers (1)
- Current Transformers (1)
- Lithium-Ion Battery (1)
- Pressure (1)
- aerospace cleanrooms (1)
- cems (1)
- digital transformation (1)
- ipv6 multicast (1)
- ipv6 multicast address (1)
- ipv6 multicast address range (1)
- isolation room pressure monitoring (1)
- multicast address ipv6 (1)
- multicast ipv6 (1)
- operating room (1)
- pharma 4.0 (1)
- pressure sensor (1)
- pressure transducer companies (1)
- semi conductor (1)
- sensors and transducers (1)
- setra pressure transducers (1)
- submetering (1)
- sustainability (1)
- temperature monitor (1)
- temperature monitoring for pharmacies (1)
- transducers (1)
- usp 800 (1)
- water (1)
- what does hvac stand for (1)
- what is a transducer (1)
- what is hvac (1)