Setra FLEX™ is a complete monitoring and control solution in a pre-configured and easy-to-use package. Offering all of the essential parameters that require monitoring, the FLEX will meet all of your critical environment needs.
Do you have a project and are you thinking of using our Setra FLEX? Get in touch with our sales team for the best discounts or to learn more.
Detailed Description
Setra FLEX™ provides a flexible room environmental control and monitoring solution in a simple-to-use package. An attractive flush mount face plate is complemented by an intuitive graphical display to meet any architectural requirement.
More Than a Room Pressure Monitor - The unit supports 3 rooms, monitoring up to 6 parameters for each room. These optional additional parameters can include humidity, temperature, occupancy, particle count, door status, air velocity, and many more environmental factors. An optional differential pressure sensor can be either factory-installed in the unit or ordered separately and installed above the ceiling. Integration with building automation systems is made easy through either BACnet/IP or BACnet MS/TP network protocols.
Modular Design - A modular hardware design enables FLEX to fit in various wall thickness found around the globe. For applications which require the monitor to fit in wall depths less than 50mm, FLEX can be ordered with an external pressure sensor. When mounting in a three gang electrical box, FLEX can be ordered with an integrated on-board sensor. Sufficient on-board I/O provides connectivity for most common equipment and sensor applications. A high accuracy of 0.25% differential pressure transducer is used in all pressure sensing options. A projected capacitive touch screen provides swipe functionality and allowed for use with medical gloves. The face plate is attached to the unit body, enabling both tamper resistant operation and easy opening for pressure calibration.
Setra FLEX-RM and FLEX-RC - FLEX software is designed to suit any application, with the ability to support up to 3 rooms. FLEX-RM (Room Monitor) provides monitoring only, for those applications where no control from the touch screen is needed. FLEX-RC (Room Control) offers monitoring, plus PI loop or network control of VAV boxes, venturi valves, or hydronic reheat valves. Software is pre-installed, with configuration and network integration done using simple setup screens. There is no programming required. When completed, configuration settings on one unit can be cloned to other devices using a standard USB thumb drive, thereby shortening commissioning time. Units can also be configured remotely over a BACnet network.
FLEX's monitor is both a controller and a monitor, with audible and visual alarming on all room parameters. FLEX's monitor enables users to save energy by choosing from two PI control loops and two monitoring sets for any of four room modes, such as occupied and unoccupied.
Optional adapter boxes are available for installations where cutting into the wall is not possible.
Think of Setra Flex as the hub of your environmental monitoring solution. The sensors below (plus many others) can tie into Setra Flex.
Setra Flex can communicate with any 3rd party sensor over BACnet or direct wiring.
GOING BEYOND ROOM PRESSURE
From the pressure experts comes the most accurate and reliable room pressure monitor in the industry _ but that's not all. Now you can monitor and control pressures, temperature, humidity, and air changes per hour; plus, any two additional parameters you may require. Visualize the data by either hard wiring the sensors, or by mapping network objects via BACnet. The FLEX is flexible enough to meet any HVAC sensing or control need and customizable enough to monitor energy usage and industrial equipment.
EASY CONFIGURATION
The Setra FLEX comes out-of-the-box ready to configure at the job site. No programming or training is required for setup. Just configure your sensors and network on-site and the FLEX is ready to go. If there are many units to configure, our unique USB cloning feature helps you get them done even faster, saving time and money.
FLEX RM / FLEX RC
FLEX comes in two models, providing both the best price-to-performance as well as the one-of-a-kind feature set to meet the most difficult application needs. Both FLEX models can be controlled over the network via read/write BACnet objecs, permitting both local control via the touch screen or control from the BMS.
Specs
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov)
NOTICE: Lead is encapsulated in the sensor glass housed inside the product.
Service & Calibration | Products | Service/RMA | Supplier | Customer | Contact Us | FAQs | About | Careers | Request Quote | Blog | Fortive Supplier Diversity
159 Swanson Road Boxborough, MA 01719 | orders@setra.com
Copyright © 2022 Setra Systems. All Rights Reserved. | Terms & Conditions | Privacy Notice | ISO 9001:2015 Certified | Prop 65 | Cookies