 |
 |
 |
 |
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
Model
212FT True Flow-Through Pressure Transducer True flow-through design for accurate in-line pressure measurement of liquids or gases. A 1/4" tube electropolished to 7Ra (10 max) finish eliminates potential particle and moisture entrapment. Available in gauge or compound pressure ranges from 100 to 3000 psig, and in absolute pressure ranges from 30 to 3000 psia. |
 |
Model
217 Downmount Pressure Transducer for Modular "Block" Gas Sticks Designed for modular "Block" gas sticks and panels. The Model 217 is a down-mount ("C" Seal) pressure transducer with a small swept sensor chamber for easy purgeability. All wetted parts are VAR316L SS electropolished to 7Ra (10 max.) finsih. Available in gauge, absolute or compound ranges from 25 psig to 3000 psig. Also available in BAR ranges. |
 |
Model
223 1" Dia. Flow-Through Pressure Transducer The Model 223's one inch diameter and flow through design make it an ideal fit for most ultra-high purity applications. This pressure transducer is available with a variety of pressure fittings including tube stub and Swivel Face Seals, and choice of 4 pin Bayonet connector or 6 ft. Multiconductor Cable for electrical termination. The Model 223 has a rotatable cover for side access to zero and span potentiometers. |
 |
Model
224: 1.3" Dia. Flow-Through Pressure Transducer The Model 224 flow-through pressure transducer is available with a variety of pressure fittings including tube stub and Swivel Face Seals, and choice of 4 pin Bayonet connector, 9 pin or 15 pin D-sub connectors, or 6 ft. Multiconductor Cable for electrical termination. The Model 224 has top access to zero and span potentiometers. |
 |
Model GCT225:
Single-Ended Low Cavity Volume Pressure Transducer Superior stability, sturdy design, low cavity volume and low price, make this pressure transducer a wise choice for high purity applications. Available with choice of 5 VDC, 10 VDC, or 4 to 20 mA output. |
| |
|
|
|
Model
227 Ultra-High Purity Pressure Transducer - 1-1/8" C-Seal Downmount The Model 227 is designed with a space-saving 1 1/8" C-Seal downmount interfacing base for high density, modular block gas sticks and panels required for today's 300 mm tools. Available with choice of 5 VDC, 10 VDC, or 4-20 mA ouput and ±0.25% Full Scale or ±1.0% of Reading accuracy. |
 |
Model
327 A 1-1/8 inch Micro Display Designed for in-line installation between the power supply and the pressure transducer, the Model 327 has a rotatable face for 360° viewing. A low power consumption device, the Model 327 is calibrated to convert the transducer's 0 to 5 VDC, 0 to 10 VDC, or 4 to 20 mA output to a viewable 3-1/2 digit display. A choice of electrical connector combinations are available. The Model 327 interfaces with Setra's Model 217, 223, 224, and 227. |
 |
|
 |
HEATED
700 Series Vacuum Pressure Transducer Models 764/769/774 These pressure transducers offer integral heated sensors and electronics, temperature controlled to your choice of 45°C, 100°C, or 123°C. Designed to safeguard against process contamination and improve the integrity of your process, these pressure transducers exhibit exceptional performance. These units offer an accuracy of ±15% of Reading with a resolution of 0.005% of Full scale in pressure ranges as low as 50 mTorr up to 1000 Torr. |
| |
|
|
|
Model
720 CVG: (Capacitance Vacuum Gauge) This low cost, compact vacuum gauge is designed to be used with pressure media compatible with Inconel.® The accuracy of this transducer is assured with a wide compensated operating temperature of 0 to +50°C and exceptional temperature coefficients of ± 0.005% FS/°C at Zero and ± 0.027% of Rdg/°C at span. |
 |
Model
760 Vactron™ Series: Capacitance Manometer - Absolute Pressure Transducer This low cost capacitance manometer offers excellent zero stability and barometric insensitivity. Designed for accurate and repeatable vacuum measurement, Setra's Vactron™ Model 760 capacitance manometer has a 0 to 5 VDC or 0 to 10 VDC output that is linear with pressure and independent of gas composition. |
|
Model
CWS 321: Gas Cylinder Weighing Scale The Model CWS 321 Weighing Scale is designed to weigh gas cylinders to within 0.10% accuracy, reducing gas replacement costs and shutdown time. Its compressed pivot design results in a low profile (less than 1 inch) scale, ideal for easy gas bottle replacement. The multiple strain gauge design eliminates off-center-loading errors. High resistance strain gauges, combined with an additional RFI shield, produce lower susceptibility to output noise and RFI error. |
|Application Notes| |News Releases| |Articles| |Trade Shows| |Sales Offices|
|UHP Distributors|
|Site Map| |About Us| |Contact Setra| |Search| |Employment|
Tel (978) 263-1400 · Toll Free (800) 257-3872
Web site design by DreamLight Incorporated: DreamLight.com