Model 230 w/3-Valve Manifold: The 3-valve manifold is rugged, lightweight and compact, weighing less than 2.5 pounds and measuring 7.05"Wide x 6.25"High. Its all brass body, brass pipe fittings, copper tubing and plastic valves are ideal for high line pressures of 250 psi. The3-valve manifold eliminates the possibility of exceeding the pressure rating of the transducer. When combined with our Model 230 Wet-to-Wet Differential Pressure Transducer, the 3-valve manifold’s one-piece, machined brass body construction guarantees a leak-free system and minimizes external pipe connections.

 

 

Model 230: This wet to wet differential pressure transducer provides a high output without compromising your budget. Unlike fluid filled sensors that can rupture, the Model C230's wetted parts are all stainless steel. Unidirectional and bi-directional ranges are available from ±1 to 100 psid.

Model 231Multi-Sense®: The Model 231 "all in one" design provides users with field accessible ranging, choice of output and field zeroing. Choose from three configurable pressure transducers offering 8 switch selectable pressure ranges from ± 5 psid up 50 psid, ±10 up to 100 psid or ±25 up to 250 psid, and choice of 0-5 VDC, 1-5 VDC, 0-10 VDC or 4 to 20 mA output in each transducer.

 

Model 239/C239: Designed to measure low pressures, the Model 239/C239 is available in unidirectional and bi-directional ranges as low as ±0.25"WC. These transducers are ideally suited to a variety of applications such as HVAC Control, Medical Instrumentation, Energy Management, Leak Detection, Clean Rooms, and Environmental Testing.

Model 280E/C280E: Affordability, rugged packaging, and an accuracy of 0.11% full scale combine to make these transducers an excellent choice for the most demanding applications. Available in gage, absolute and vacuum pressure ranges.

Model 256: The Model 256 is packaged in an aluminum enclosure, which has been specifcally designed for weatherproof service. Available in a wide variety of gauge pressure ranges, the Model 256 is only 3.7" high x 3.5" wide and operates on a low cost unregulated power supply.

Model 550: The Model 550 measures low pressures from 10 in. W.C. up to 400 in. W.C. It is packaged in a 318 stainless steel housing for use in general purpose and  submersible applications such as water, waste water and viscous fluids. It features a 3:1 range turndown for field adjustment from 110% to 32% of the nominal pressure range, making it ideal for applications that are subject to overpressure. This unit is RFI/lightning protected and is also offered in an optional Galvanic Intrinsic safe design.

 

XP Series: Setra's Model 204, C204, 280E and C280E, when "factory installed" in this copper-free aluminum enclosure, are Factory Mutual Systems approved for use in hazardous locations and for use in NEMA 4 weatherproof environments.