setra
Pressure Measurement Division
   
Division Profile
Products
Installation Instructions
Technology
Application Notes
News Releases
Articles
Trade Shows
Sales Offices
 
Model SRPM
Room Pressure Monitor

SETRA SYSTEMS INTRODUCES MODEL SRPM
Secure Sense®  RoomPressure Monitor

Boxborough, MA - Setra Systems, Inc., a leading manufacturer and designer of pressure measurement instrumentation, introduces the Model SRPM (Setra Room Pressure Monitor) designed for pharmaceutical, hospital, semiconductor, clean rooms, research laboratories, and critical low differential pressure applications that require stringent pressure monitoring and alarming.

The SRPM monitors the positive or negative pressure in protected environments and airborne infection isolation rooms per CDC guidelines. The SRPM monitor combines Setra’s proven and patented very low, pressure sensor technology with the latest in electronics, measuring and displaying highly accurate pressure readings to 0.001 inches of water column resolution.

A large graphic RGB backlit touch-screen display allows fingertip access to menus that guide the user through room setup, application, security and calibration. The SRPM features a green LED to indicate normal conditions, and a red LED, audible alarm, and SPDT relay, for remote annunciation, to signal unsatisfactory room pressure status. Additional features include selectable analog 0 to 5 VDC, 0 to 10 VDC and 4 to 20 mA output, relay output, output and display averaging, and door status indication.

Setra’s optional Model SRAN, remote annunciator, interfaces with the SRPM to provide remote visual and audio indication of room pressure status. A Green LED indicates normal room conditions, a Red LED indicates an alarm condition, and a buzzer provides an audio alarm for indication of room pressure status. An acknowledge switch is also provided to deactivate the audio and visual alarms.

The SRPM is auto-calibration capable when used with Setra’s Model 869 Expert System Low Pressure and Documenting Calibrator. The SRPM has a removal process head for connection to the 869 for in-situ calibration.

   
top of page  

|PREVIOUS| |INDEX| |NEXT|

|Division Profile| |Products| |Installation Instructions| |Technology|
|Application Notes| |News Releases| |Articles| |Trade Shows| |Sales Offices|

|Site Map| |About Us| |Contact Setra| |Employment|

|Home Page|

   
  159 Swanson Road, Boxborough, MA 01719-1304
Tel (978) 263-1400 · Toll Free (800) 257-3872
     
   

©1998 Setra Systems, Inc. All rights reserved. All names and logos are trademarks. All other names, logos, and trademarks are property of their respective owners.

Web site design by DreamLight Incorporated: DreamLight.com