Customers also bought:
High accuracy pressure for corrosive liquids or gases – gauge, compound and absolute
Pressure transducer for corrosive liquids or gases – gauge and absolute PSI ranges
High accuracy for corrosive liquids or gases - gauge, vacuum and absolute pressures
Overview
Setra's Model ASM is a high performance pressure transducer used in the accurate measurement of pressures on engine test stands, dynamometers, particle test & analysis, and research & development applications. Optional end-point accuracies of ±0.05% FS (±0.04% BFSL) and ±0.1% of reading are both available with 0.25% total error band as well as the standard ±0.1% FS accuracy. Pressure ranges as low as ±15 psi up to 1000 psi are standard, with an optional proof pressure up to 10X.
Features
> ±0.05% FS End-Point Accuracy (±0.04% BFSL)
> Low Thermal Error over Wide Temperature Range
> High Stability due to New Patented Sensor Design
> Small package (1.3" diameter)
> Secure and Simple Field Calibration
> Optional Overpressure Protection up to 10X Proof Pressure
| Pressure Ranges
0 to 15 psi
0 to 25 psi
0 to 50 psi
0 to 100 psi
0 to 150 psi
0 to 200 psi
0 to 300 psi
0 to 500 psi
0 to 750 psi
0 to 1000 psi
|
Accuracy
±0.05% FS; <0.25% TEB (+0.04% BFSL)
Output
0 to 5 VDC
0 to 10 VDC
4-20 mA
Excitation
9-30 VDC (5 VDC & 4-20mA output)
15-30 VDC (10 VDC output)
Electrical Termination
6-Conductor Cable, Pigtail
6-Pin Bayonet Connector
Media
Gases or liquids compatible
with 17-4 stainless steel.
|
Options
Pressure Ranges
Pressure Type
Pressure Connection Port
Output
Electrical Termination
High Overpressure Protection
Accuracy:
±0.1% Reading; <0.25% TEB
±0.1% FS; <0.5% TEB
±0.1% FS; <1.5% TEB
Documents
and Downloads