Model 267 Differential Pressure Transducer

Model 267 Buy Now / Configure

Very low differential, Optional LCD, and Static Probe

Click here for product data sheet: Model 267 Data Sheet

Email to a Friend

Customers also bought:

Model 869 Expert System

Reduces cal. time by up to 90%, secure EPIC interface w/ models 269 and SRPM

Model SRH Relative Humidity Transmitter - Duct-Mount

Enclosure designed for easy probe removal, field-replaceable sensor tip

Model CTC Current TransducerSeries

Current transducer, clamped/ split core for existing installs, optional snap-on power relay

Overview

The Model 267 pressure transducer sense gauge and differential pressure and are offered with a high level 5 VDC or 10 VDC output as well as a 4-20 mA output. The Model 267 is available with an optional LCD display for convenient viewing of pressure reading.

Features

> Optional 3 1/2 Digit LCD Display with a 0.5% FS Standard Accuracy

> NEMA 4/IP65 Rated Housing

> Optional Accuracies as High as 0.25% FS

> 24 VAC or 24 VDC Excitation

> PG-9, PG13.5 or Conduit Electrical Termination

> Integral Static Pressure Probe

> Ranges as low as 0.1 in. W.C. (25 Pa)

> Meets

Conformance Standards

Pressure Ranges

in. W.C.
0 to 0.1 ± 0.1
0 to 0.25 ± 0.25
0 to 0.5 ± 0.5
0 to 1 ±1
0 to 1.5 ±1.5
0 to 2.5 ± 2.5
0 to 5 ± 5
0 to 10 ±10
0 to 25 ±25
0 to 50 ±50
0 to 100

Pascals
0 to 25 ±25
0 to 50 ±50
0 to 100 ±100
0 to 250 ±250
0 to 500 ±500
0 to 1000 ±1000
0 to 2500 ±2500
0 to 4000
0 to 7000

Accuracy

±1.0%FS

Output

4-20 mA
0-5 VDC
0-10 VDC

Excitation

Voltage:
(for 0-5 VDC Output) 9 to 30 VAC/12 to 40 VDC
(for 0-10 VDC Output) 11 to 30 VAC/13 to 40 VDC

Current: 24V (DC Only)

Units

in.WC
Pascal

Pressure Type

Differential
Bidirectional

Pressure Fitting/Elec. Termination

3/16’’ Barbed Brass
Standard Fitting
PG-13.5 Strain Relief
PG 9 Strain Relief
9 pin D-sub Connector1/2’’ Conduit Opening

Media

Typically air or similar non-conducting gases

Options

Display
LCD Display
No Display

Accuracy
Optional (w/Cal. Cert)
±0.4% FS
±0.25% FS
±1.0% FS
±0.5% FS

Pressure Fitting/Electrical Termination
1/4’’ NPT F, Brass
Optional Fitting
PG-9 Strain Relief
PG 13.5 Strain Relief
9 pin D-sub Connector
1/2’’ Conduit Opening

Static Duct Probe
Optional Fitting
PG 9 Strain Relief
PG 13.5 Strain Relief
9 pin D-Sub Connector
1/2" Conduit Opening

- Model 242905
  Static pressure fitting for 3/16” and 1/8” I.D. plastic or rubber tubing
  
  Model 242902-12
  Static Pressure Tip, same as A-301 with 12” insertion depth
  
  Model 242904
  Static pressure fitting for 1/4” metal tubing connection
  
  Model 242902-06
  Static Pressure Tip, same as A-301 with 6” insertion depth
  
  Model 299 Dri-Sense
  Pressure transducer termination enclosure, replaceable desiccating covers, NEMA 4X
  
  Model 242903-04
  Static Pressure for 3/16” and 1/8” I.D. plastic or rubber tubing
  
  Model 242902-08
  Static Pressure Tip, same as A-301 with 8” insertion depth
  
  Model 242901-04
  4" straight static pressure sensor tip with flange
  
  Model 242901-08
  8" straight static pressure sensor tip with flange
  
  Model 242901-06
  6" straight static pressure sensor tip with flange
  
  Model 242902-04
  Static Pressure Tip for 1/4” metal tubing connection
  
  Model 242903-06
  Static Pressure Tip, same as A-302 with 6” insertion depth