Model 267MR Multi-Range Pressure Transducer

Model 267MR Buy Now / Configure

Multi-Range, Very low differential, Optional LCD, and Static Probe

Click here for product data sheet: Model 267MR Data Sheet

Email to a Friend

Customers also bought:

Model SRH Relative Humidity Transmitter - Duct-Mount

Enclosure designed for easy probe removal, field-replaceable sensor tip

Model CSS Series Current Switch

Current switch, solid core design for new installations, optional snap-on power relay

Model CTC Current TransducerSeries

Current transducer, clamped/ split core for existing installs, optional snap-on power relay

Overview

The Model 267MR Multi-Range pressure transducer has up to 6 field selectable pressure ranges (bi-directional and unidirectional) in each unit. The simple flip of a dipswitch enables the user to easily field calibrate the unit with minimal effort. These units sense gauge and differential pressure and are offered with a field selectable high level 5 VDC or 10 VDC output as well as a 4-20 mA output.

Features

> NEMA 4/IP65 Rated Housing

> 24 VAC or 24 VDC Excitation

> PG-9, PG13.5 or Conduit Electrical Termination

> Integral Static Pressure Probe

> Ranges as low as 0.1 in. W.C. (25 Pa)

> Meets CE Conformance Standards

Pressure Ranges

in. W.C.
MR1 = 0 to 0.1, ±0.05
MR2 = 0 to 0.25, 0.5, 1, ±0.125, ±0.25, ±0.5
MR3 = 0 to 1.25, 2.5, 5.0, ±0.625, ±1.25, ±2.5
MR4 = 0 to 7.5, 15, 30, ±3.75, ±7.5, ±15

Pascals
MR5 = 0 to 25, 12.5
MR6 = 0 to 50, 100, 200, ±25, ±50, ±100
MR7 = 0 to 250, 500, 1000, ±125, ±250, ±500
MR8 = 0 to 625, 1250, 2500, ±312, ±625, ±1250
MR9 = 0 to 1875, 3750, 7500, ±937, ±1875, ±3750

Units

in.WC
Pascal

Pressure Type

Differential

Output

4-20 mA
0-5 VDC
0-10 VDC

Pressure Fitting/Elec. Termination

3/16’’ Barbed Brass
Standard Fitting
PG 13,5 Strain Relief
PG 9 Strain Relief
9 pin D-sub Connector
1/2’’ Conduit Opening

Accuracy

±1.0%FS

Media:
Typically air or similar non-conducting gases

Options

Accuracy

Optional (w/Cal. Cert)
G = ±1.0% FS

Display

Yes

Pressure Fitting/Electrical Termination

1/4’’ NPT F, Brass
Optional Fitting
PG-9 Strain Relief
PG 13.5 Strain Relief
9 pin D-sub Connector
1/2’’ Conduit Opening

Static duct Probe

Optional Fitting

PG 9 Strain Relief
PG 13.5 Strain Relief
9 pin D-sub Connector
1/2" Conduit Opening

- Model 242901-08
  8" straight static pressure sensor tip with flange
  
  Model 242904
  Static pressure fitting for 1/4” metal tubing connection
  
  Model 242905
  Static pressure fitting for 3/16” and 1/8” I.D. plastic or rubber tubing
  
  Model 299 Dri-Sense
  Pressure transducer termination enclosure, replaceable desiccating covers, NEMA 4X
  
  Model 242902-06
  Static Pressure Tip, same as A-301 with 6” insertion depth
  
  Model 242902-12
  Static Pressure Tip, same as A-301 with 12” insertion depth
  
  Model 242903-06
  Static Pressure Tip, same as A-302 with 6” insertion depth
  
  Model 242901-06
  6" straight static pressure sensor tip with flange
  
  Model 242903-04
  Static Pressure for 3/16” and 1/8” I.D. plastic or rubber tubing
  
  Model 242902-04
  Static Pressure Tip for 1/4” metal tubing connection
  
  Model 242901-04
  4" straight static pressure sensor tip with flange
  
  Model 242902-08
  Static Pressure Tip, same as A-301 with 8” insertion depth